How to Use BioGlow Nail Clips for a Salon Finish
By Nailberry - Award winning non toxic | Published: 2026-10-27
Category: How-to Guides
Learn how to use BioGlow Nail Clips with remover for a clean, salon-quality manicure at home. Step-by-step guide with tips to avoid common mistakes.
Quick answer
Use BioGlow Nail Clips to hold remover-soaked cotton against your nails, allowing the solvent to break down polish without scrubbing or harsh chemicals.
Why Use Nail Clips Instead of Cotton Balls?
Traditional removal methods often involve scrubbing, which can dry out cuticles and damage the nail plate. BioGlow Nail Clips keep remover in contact with polish steadily, so you need less rubbing. They are especially helpful for glitter or dark shades that normally take extra effort.
What You Will Need
You will need BioGlow Nail Clips (pack of 5), BioGlow Nail Polish Remover, cotton pads or balls, and a clean workspace. The clips are designed to work with the remover for fast, gentle removal.
Step-by-Step Guide
- Soak the cotton pad: Cut a cotton pad into five small squares (one per nail). Saturate each square with BioGlow Nail Polish Remover. Do not use too little remover—the cotton must be wet enough to keep the polish dissolving. If the cotton dries out mid-process, the clip will not hold it firmly and removal will take longer.
- Place the cotton on the nail: Press a soaked square directly onto the nail surface, covering the entire polish area. Hold it in place with your thumb, then slide the BioGlow Nail Clip over the fingertip until the clip grips the cotton and nail firmly. Make sure the clip is snug but not painful. A loose clip will not keep the cotton in contact with the polish.
- Wait 5–10 minutes: Leave the clips on for at least 5 minutes. For glitter or multiple coats, wait up to 10 minutes. Do not remove the clips early—the remover needs time to penetrate the polish layers. Set a timer so you do not forget. Leaving clips on longer than 15 minutes may dry the cuticle unnecessarily.
- Remove the clip and wipe away polish: Slide each clip off gently. The polish should appear cracked or lifted. Wipe the nail with a fresh cotton pad in one direction from cuticle to tip. If any polish remains, repeat the process on that nail only. Do not scrape the nail with a tool. If the polish does not come off easily, the remover needs more time, not more force.
Product Facts
- BioGlow | Nail Clips: Pack of 5 sturdy clips for multiple uses. Designed specifically for use alongside BioGlow Nail Polish Remover. You can remove polish from all ten fingers in two rounds without needing to rinse the clips between uses.
BioGlow | Nail Clips
